How to Remove Frigidaire Water Filter

Often, people think water filters are like other appliances such as refrigerators and washing machines. After all, according to research by Whirlpool in 2017, 82% of consumers believe their household should have a filter, or they would use bottled water.

However, many of these households also acknowledge that installing a filter is complicated. The process involves finding the right size for your refrigerator and then making sure it fits properly before you can start using it; there's also the issue of installing and maintaining it correctly.

In this article, we've gathered all the information you need about how to remove a Frigidaire water filter for you to find out what size your refrigerator is and make sure that it fits properly before you can start using it. All with step-by-step instructions included, so there's no guesswork involved! 

How to Remove Frigidaire Water Filter

You'll need a few things:

  • Good quality, flexible, non-metallic pliers
  • A pair of long-nose tweezers
  • A small, flat-headed screwdriver
  • Scissors

A Phillips head screwdriver will work just fine if you don't have a flat-head screwdriver. It's an easy project to do because you don't need special equipment, and all you need is a pair of regular household tools.

Step 1: Locate The Filter

If you have a Frigidaire water filter, the first step is to locate it. The filter is usually located under the sink or on the side of the refrigerator. If you cannot locate the filter, you can contact Frigidaire for assistance.

In case you have ever had a trouble with your refrigerator's water filter, you know it can be a real pain to locate the filter and then remove it. You probably also know that there are many different types of filters out there and that they all look different.

What are the steps to finding the right one? And once you've found it, how do you remove it without breaking or damaging it? This post will show you how to locate your refrigerator's filter and then how to remove it.

Step 2: Unscrew The Filter

You can remove the frigidaire water filter in several different ways. One way is to unscrew the filter. Be cautious when doing this, as the filter can be very tight. Another way to remove a frigidaire water filter is to use a wrench.

Again, be cautious as the filter can be very tight. A third option is to use an adjustable wrench, and this method works best if the filter has been removed before.

Step 3: Remove the Filter From the Refrigerator

Removing a frigidaire water filter can be a difficult task. If the filter is not properly removed, it can cause damage to the refrigerator. Follow these steps to remove the filter:

  1. Open the refrigerator door.
  2. Lift the filter cover and remove the filter.
  3. Rinse the filter and cover it with cool water.
  4. Replace the filter cover and close the refrigerator door.
  5. Turn off the refrigerator.
  6. Check the refrigerator's water supply line to see if any debris is blocking it.
  7. Check the refrigerator's water supply valve to see if it is working.

Step 4: Fill a glass with Cold Water

After unscrewing the top of the water filter, it is time to remove it:

  1. Filter the water in a glass filled with cold water and then pour it over the filter. Gently swirl the water around the filter to loosen any debris.
  2. The top of the filter should be unscrewed using a pair of pliers.
  3. Remove the filter and discard it.

Step 5: Place the Filter in the Glass

If you have a Frigidaire refrigerator, follow these steps to remove the water filter: 

  1. Identify the water filter by opening the refrigerator door. It is a white, rectangular object with a black rubber gasket around the top. 
  2. Remove the water filter by pressing down on one end and pulling it out of the refrigerator. 
  3. Rinse the water filter with cold water to remove any debris. 
  4. Place the water filter in a glass jar or container to store.

Step 6: Clean The Area

After you have removed the water filter, it is important to clean the area where it was located. Use a mild soapy solution and fresh water to clean the area. Be sure to rinse off all the soap before moving on to the next step.

Step 7: Replace The Filter

If the water filter is not causing any problems and you have replaced it according to the instructions, then it may be time to replace the filter. To replace the filter, follow these steps: 

  1. Open the doors of the refrigerator. 
  2. Find the filter housing and unscrew it. 
  3. Make sure that the old filter is removed and that a new one is installed. 
  4. Close the doors of the refrigerator and reattach the filter housing.

Step 8: Enjoy the Clean, Fresh Taste of the Water 

How do you remove a Frigidaire Puresource 3 water filter?

To remove the Frigidaire Puresource 3 water filter:

  1. Remove the filter from the faucet after turning off the water supply.
  2. If the filter has a handle, turn the handle to the left to remove the filter.
  3. Pull the filter straight out of the faucet and discard it.

Remove the new filter from its packaging, and then screw it onto the faucet. Ensure the water supply is turned on in order to check for leaks. If there are no leaks, you can reattach the filter to the refrigerator.

The refrigerator should be turned off and its door should be opened.

If the refrigerator is not cooling or has been damaged somehow, it may be necessary to unplug the appliance and open the door to remove the filter.

Remove the water filter and rinse it with cold water.

If your refrigerator is less than a year old, it likely has a water filter. Follow these steps to remove the water filter and rinse it with cold water:

  1. Open the refrigerator door to remove the water filter.
  2. If the water filter is held in place by screws, remove the screws and gently pull the filter out of the refrigerator.
  3. If the water filter is attached by adhesive, peel off the adhesive backing and discard it.
  4. Fill a sink with cold water and place the filter in it.
  5. Swirl the water around the filter to dislodge dirt or debris.
  6. Rinse the filter with cold water until the water is clear

Place the filter on a clean, dry surface and screw it onto the refrigerator water intake tube.

If there is a water filter installed in your refrigerator, it is important to remove it before you replace the water filter. To remove the frigidaire water filter, place it on a clean, dry surface. Then screw it onto the refrigerator water intake tube.

Push down on the filter until it is seated in the water intake tube.

If your water filter has been installed properly, you will need to depress the filter until it is seated in the water intake tube. Once seated, you can release the filter's retaining clip and pull it out of the tube.

Close the refrigerator door and turn on the power to the appliance.

If your refrigerator is not cooling properly, it may be because of a water filter. To remove the filter, you will need to close the refrigerator door and turn on the power to the appliance.

The unit needs to cool down for at least 15 minutes after you turn it on. Contact a repair technician immediately if the refrigerator does not cool down after waiting this long.

Test the refrigerator for leaks.

Once the refrigerator has cooled down, you should check for leaks. You can do this by opening the door and listening for dripping water. If you hear dripping water, stop testing immediately, which could indicate a leak inside the refrigerator. Contact a repair technician if you hear dripping water.

Reinstall the water filter.

After removing the water filter, rinse it with cold water and install it back into the refrigerator. If you are reinstalling the filter, be sure to follow the manufacturers' instructions.

Replace the door seal.

The door seal helps keep moisture from entering the refrigerator. When replacing the door seal, make sure to use the correct type of seal. The most common types are foam seals and gasket seals. Foam seals are easier to install than gasket seals, and gasket seals tend to last longer. However, they require more maintenance.

Check the temperature dial.

The temperature dial is located near the front of the refrigerator, and it allows you to adjust the temperature settings. If the dial is stuck or frozen, try heating the refrigerator slightly to defrost it.

Clean the condenser coils.

To help prevent ice buildup on the condenser coils, periodically clean them. Remove any dust or debris from the coils and wipe them with a damp cloth.

How Often Should You Change Your Frigidaire Refrigerator Water Filter?

There is no set answer to this question, but the answer to this question will depend on many factors. Frigidaire recommends changing your Frigidaire refrigerator water filter every 6 months, but most users change their filters every 3 months.

Every six months, refrigerator water filters should be replaced according to the instructions provided by the refrigerator manufacturer.

In an environment where hard water is plentiful, you should replace your water filter earlier than six months if you live in a hard water area.

Knowing how often to change your Frigidaire water filter can ensure better quality drinking water.

Frigidaire recommends changing the refrigerator water filter every 6 months.

The manufacturer provides a guide for how to change the water filter.

Checking the fridge's water filter indicator is easy to determine when it needs to be replaced.

There are two types of Frigidaire refrigerator filters: activated carbon and molecular sieves.

Activated carbon filters remove chlorine, fluoride, and other contaminants, while molecular sieves trap larger particles that can clog your refrigerator's mechanical parts over time.


In conclusion, the first step to removing the filter is to remove the access panel. The easiest way to do this is to pull the top cover off the refrigerator. Then, you need to unscrew the screws that hold the water filter in place.

You should be able to do this without using any tools. The next step is to pull the filter out of the unit. You will have to pull the filter out by hand carefully to do this.

You may want to take a paper towel and wrap it around the filter to make it easier to remove. A new one can be used to replace the old one after the old one has been removed.


You may also like

How Often to Water Poinsettia

How Often To Water Poinsettia? Care Guide For Live Christmas Plant

The poinsettia is a popular holiday plant. Its bright red leaves and

​Read More
How to bath a dog without water waterev

How To Bath A Dog Without Water: 13 Steps (With Pictures)

A dog is a member of our family, and they deserve to

​Read More
How often do you water outdoor potted plants

How Often Do You Water Outdoor Potted Plants? – 12 Tips For Healthy Flowers

When determining if your plants need water, the finger-dip test remains the

​Read More
How often to water impatiens

How Often To Water Impatiens? New & Overwatered Impatiens Care & Tips

Impatiens (also known as busy Lizzy) are beautiful houseplants that are easy

​Read More
How often to water fruit trees

How Often To Water Fruit Trees? Young Fruit Trees Need Plenty Of Water

A fruit tree is a perennial plant that grows from a seed.

​Read More
How often to water an Orange Tree

How Often To Water An Orange Tree: Tips, Tricks, And Requirements

Orange trees are some of the oldest living things on earth. They

​Read More
{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

Check the articles below

December 9, 2023

The poinsettia is a popular holiday plant. Its

December 6, 2023

A dog is a member of our family,

December 1, 2023

When determining if your plants need water, the