GE Water Softener Problems: How To Get Rid of GE Water Softener Problems

The GE Water Softener is a system that requires very little maintenance. The only time you need to hear from the company is if you experience any problems. There are some problems that you can handle yourself. Troubleshooting is the first step you need to take. The unit could share some of the following issues: 

  1. No water 
  2. The water is slow to drain
  3. The water pressure is low 
  4. There is water leaking from the bottom of the unit 
  5. There is a bad taste in the water 
  6. It discolored the water 
  7. There is a bad odor in the water

Why GE Water Softeners are important

Water is so important to the functionality of the home. Your water pressure and quality are important. The water softener uses several chemicals to improve the taste, odor, and hardness of your water. The alkaline water is more eco-friendly and healthier for the environment.

Another benefit of the Water Softener is that it helps protect your pipes from freezing and provides protection against corrosion. By reducing the hardness of your water, it can save you money in the long run. If the water softener can restore your soft water to hard water, it can lower your water bill.

GE Water Softener Troubleshooting

Failing to maintain your home’s water softener properly can lead to potentially serious problems. For one, your machine may produce more water than necessary, which can cause several issues. Water that is too soft can cause your pipes to corrode and even leak. Also, bacteria can quickly grow in your water system if you aren’t regularly backwashing your machine. The musty smell can affect your home and even cause the growth of dangerous toxins.

Other Common GE Water Softener Issues:

Replacement of failed water softeners may be difficult or impossible to do, so you will need to find a company that can handle that for you. Moisture in the water circuit can cause bacteria to build up. The softener will cause the water to become hard and the bacteria to become active. Your machine may also produce more water than is required, which can produce negative results.

Faulty fan:

Poor circulation through the filter is the primary source of problems, but the main one for the house water softener is the fan motor. The motor might be too close to the unit and cause the unit to run more than it is supposed to. The softener might also be too small and therefore only run when it needs to.

GE Water Softener Problems

1. If the water pressure is low, water could leak into the unit: Check whether the seal on the bottom of the unit is leaking. Take your key and pry the seal open if necessary. If the seal cannot be pried open or rusted completely, replace the water softener unit.

2. The water is slow to drain: Check to see if the filter is clogged. Clean the unit thoroughly and change the filter and wash the filter trays in hot, soapy water. Give it 30 minutes for the water to drain from the unit. Then, allow the water to drain for one full day before you can shower again.

3. The water is slow to drain: Check to see if you have a slow water flow or no water. Change the water level if necessary.

GE Water Softener Solutions

The GE Water Softener is a system that requires very little maintenance. The only time you need to hear from the company is if you experience any problems. There are some problems that you can handle yourself. Troubleshooting is the first step you need to take. Next, you need to read the instructions that came with the system.

You want to follow these instructions exactly. This will help you avoid unnecessary problems. The instructions will take you through a series of tests to see whether you can fix the problem yourself. If the test shows that the system isn’t working, contact your local plumber.

GE Water Softener ep2 softwater trouble shooting quick check

Wrap Up!

A bad or chunky water smell could be caused by something simple like a switch, valves, or a gas tank. If it is because of a gas tank and a bad smell, the gas company is not responsible. If there is a bad smell coming from the water softener unit, the machine is old.

Try cleaning the unit by taking off the top cover. Use a fire extinguisher if needed. With weak or interrupted water pressure, the softener can make the water bad tasting. A bad fuel gas tank could cause very low water pressure. If the water turns black, it could result from some valve malfunction. The machine could also leak a small amount of water every month. It is important to know what to look for when it comes to the GE Water Softener system.