How to Collect Rainwater for Drinking and Store for Future Uses

Rainwater is a healthy source of water supply, but the means of collecting it is quite challenging. Therefore, most people have given up with rainwater harvesting because it has a high rate of contamination.

Contamination may stem from environmental pollution, storage containers, and even from the connection pipe.

It is quite disturbing as, during drought season, some areas suffer from lack of water when they can have a constant supply of natural water.

To remediate this situation, we have gone the extra mile to give you detailed research on how to collect rainwater for drinking. 

Rainwater harvesting is the process of collecting runoff water from water-resistant surfaces such as rooftops to store it for later use. The traditional method involves harvesting rainwater from the roof and channeling it into downspouts connected to some sort of storage vessel.

Brief Summary Of Harvesting Rainwater

The collection of rainwater is known to various people in the world. Multiple terms have been used for it, such as rainwater collection, rainwater harvest, and rainwater catchment; they all mean the same.

We are sure that rainwater is a viable technology in the urban setting as it can be configured to provide healthy water for your whole home.

Methods of Rainwater Harvesting

There are several methods of harvesting rainwater. Here are three of the most effective ways of getting rainwater.

Surface Runoff Harvesting

Surface runoff harvesting

This method of acquiring rainwater is predominant in urban areas. As water flows by as surface runoff, it can be collected and used by engaging the right manner.

Rooftop Rainwater Harvesting

The rooftop rainforest harvesting is a system of collecting rainwater when it falls on it (rooftop).

The collected water can either be preserved in a tank or channeled to an artificial recharge system. It is a very affordable and resourceful method of collecting rainwater if rightly implemented. It also helps to increase the groundwater level in that area.

Rainwater Harvesting Through Solar Panels

It is a modern method of acquiring rainwater. It involves the use of a solar hydro-panel to harvest rainwater.

Rainwater harvesting through solar panels

The system works like the typical solar panel, but instead of just collecting solar energy, the solar hydro-panel uses the sun rays to pull water from the air. 

Rainwater That Is Safe for Drinking

Rainwater is safe for drinking if collected the right way and kept in the proper storage container. However, if done wrongly, it can result in harmful health conditions.

In that regard, the safest rainwater for drinking is those that are collected using the storage containers. You can get storage containers made by reputable companies that produce steel rainwater tanks that are made for directly harvesting rain.

If you reside in the urban areas, ensure to filter your water first before drinking or cooking with it. Ensure your rainwater settles for some time before using, so that massive particles can sink to the bottom first.

How to Harvest Rainwater

Harvesting rainwater is straightforward, but one must be careful during harvesting to prevent collecting harmful particles alongside.

How To Harvest Rainwater

There are some considerations to look out for when harvesting, and here is a step by step method you need to know about collecting potable rainwater.

Step 1. Determine if Collecting Rainwater is For You

Often, we are unaware that rainwater collected naturally is not as healthy as they appear. Although it comes from the sky into whatever storage you use to acquire, contaminants and other unhealthy particles also come with the flow.

Determine if Collecting Rainwater is For You

The tendency to have contaminants in your water is more, especially when the rainwater is coming from another source before it gets to your storage.

Rainwater from rooftops is not safe for drinking since many particles and substances, like fecal deposits from animals, may be found on the roof. Some roofs are very poisonous as they have a lot of chemicals or toxic substances. Water collected from such roofs will be highly contaminated.

You should also consider how safe the area where you stay is, as some areas can become too populated and polluted. In such areas, the rainwater is already contaminated before hitting the ground. Some environmental pollutants can readily dissolve in the rain, so collecting rainwater naturally can be harmful unless due preventive measures are observed.

Step 2. Research Local Laws

Know the reaction of your state toward the collection of rainwater. However, the laws and regulations concerning rainwater harvesting differ from one country to another as some state rules are stricter than others.

Research Local Laws

So, ensure to know the laws that guide the collection of rainwater from your state before proceeding. Some states like Texas, Virginia, and Rhode Island are okay with collecting rainwater and tend to reduce their tax payments for people who get the equipment. However, some other States frown at the idea of rainwater collection. 

Step 3. Calculate Your Water Requirements

Now is the time to discover the amount of rainwater is sufficient for you and your family. But before arriving at this point, you have to consider the local average rainfall chart to know the total average rainfall and the month which receives the most and least rain. You will know how much water you should need and harvest every time.

Calculate Your Water Requirements

Also, you should determine the reason for the rainwater harvest. Are you getting it for total sustenance, for irrigation and supplying your homestead animals? Is it a form of emergency water backup? And more. Your answer to these questions is what will determine the amount of rainwater you should store.

After deciding the amount of water you need, you can then use the quarterly drought system as a check to determine how much you need to store. However, if your area has an extended period of no rain, you have to save as much water to last.

Step 4. Learn How a Water Harvester Works

The way a water harvester works is quite simple. Rain falls into the roof and is guided to the storage container. Doing so is simple, but storing it the right and healthy way requires a bit of intelligence. Here are the essential components you need to harvest rainwater:

Learn How a Water Harvester Works

Catchment area for collecting rainwater. You will also need a roof flushing system alongside to rid the catchment area of dirt that may have accumulated with time.

Storage tank

Transfer system for connecting the catchment surface to your storage tank.

Water filter delivery system for transferring water from your storage tank to your home for use.

  • Creating a surface that can collect rainwater as it comes. Construct it in a way that it slopes in the direction you desire. The ideal material for this construction is corrugated tin.  Stone, concrete, and clay roof may work, but you may lose your water when they soak. Wood and asphalt are a no go as your water may absorb toxins.
  • Constructing a flush system and conveyance system. For the flush system, you can use PVC piping that uses gravity, and run the conveyance system into a storage tank. You can also choose to place your container either above ground or underground.
  • Screening your tank and catchment surface to protect bits of organic matter like leaves. Also, endeavor to build your system far from trees to avoid insects from falling into it.
  • Setting your water filter for due treatment, and the last part is to plug in your delivery system, and all is set. 

Step 6. Consider Upgrading to an Industrial Water Harvesting Unit

After successfully creating a smaller system, you can aim higher to create a bigger one. There are underground and above ground pre-made water harvesting units that you can buy.

Consider Upgrading to an Industrial Water Harvesting Unit

Underground water tanks will let you add value to your land and your home. Also, it will be subjected to the danger of being tampered with in times of natural disaster or take up a vast expanse of land.

How to Purify Rainwater for Drinking

How To Purify Rainwater For Drinking

Distillation

This method of rainwater purification involves separating rainwater from contaminants and purities by heating. The water is then collected through condensation.

Ultraviolet Light

When using a UV light for disinfecting your rainwater, ensure to pass it through a purification system first.

If the water does not go through filtration first, bacteria will cast a shadow in the flowing water, leaving them unharmed after passing through the system.

UV light does not alter the chemical composition of the water; all it does is disrupt the organism's cell wall and disrupt the genetic makeup.

Filters and Disinfection

The effectiveness of filters is measured by the smallest particles they can filter.

For rainwater, the filter should be like 50 microns to filter insects, sands, and other particulate matter. After filtering, you can use other water disinfection processes like chlorination, membrane filtration, or UV light.

Membrane Filtration

Membrane filtration involves the process of pushing water through layers of materials. Although it is more expensive than the other disinfection processes, it is one of the technologies that can remove pharmaceuticals from water without leaving by-products.

Germs and Other Contaminants of Rainwater

Rainwater is not as safe as you think, which makes it quite unsafe to drink. When rain falls, it can wash different contaminants like bird poop, which ends up on the roof, into your water. Rainwater can also carry bacteria, viruses, and other chemicals that are harmful to the body.

Germs and Other Contaminants of Rainwater

The tendency of falling sick due to the use of rainwater depends on one's location, the frequency of rain, the season, and your method of collecting and storing it.

Rainwater can get contaminated with dust, soot, and smoke, which can dissolve before it gets to the roof.

Also, roofing materials, piping, and storage materials can introduce harmful chemicals like asbestos, lead, and copper to the rainwater.

Rain barrels do not provide any form of filtration or protection from contaminants! However, you can add chlorine or iodine to the water, but it will not protect you from chemicals. Some parasites are also chlorine-tolerant.

You can also decide to boil your rainwater to kill the germs, but this will not remove harmful chemical compounds.

Using a first flush diverter will help prevent some of these contaminants.

You can also use cisterns, but ensure to add a screen to the water inlet or drain out the water in less than ten days to avoid mosquitoes from breeding in it. Ensure that you filter, disinfect, and get your rainwater tested regularly.

Benefits of Rainwater Harvesting

Benefits Of Rainwater Harvesting

Save Money

Setting up a rainwater harvesting system will save you from purchasing water to meet your needs. It will, in turn, augment the cost of setting up the rainwater harvesting system.

Total Water Control

With rainwater, you have complete control over your water supply and usage without waiting for any water authority permission.

For Landscape Plants

Since rainwater is not chlorinated, it is useful for gardening and other farm activities.

Saves Drainage Issues

Most areas experience flood and erosion after rain. Harvesting rainwater will help prevent your property from flooding. 

Water Back-Up

Rainwater can function as a backup source to wells and municipal water.

Inexpensive and Easy to Maintain

Setting up a rainwater harvesting system is relatively cheaper and easier to maintain than tap water.

Additional Tips

Learn How a Water Harvester Works

The fundamentals of a rain harvester are rather easy. But doing this in an efficient and sanitary manner takes a little creativity. You may need 7 Standard elements to harvest rainwater:

Catchment Surface

The catchment surface denotes the roof that will accumulate rainwater. Usually, the more significant, the better, as square footage will permit you to save more rain. The catchment surface is just one of the most crucial sections of rain.

Roof-Washing and First Flush Method

Considering that the catchment surface will be subjected to the components, it will certainly become filthy. As you want to clean your car now and then, your roofing requires a fantastic cleaning, also.

Luckily, you can let Mother Nature do the task for you using a roof-washing and original flush system. This collects the first couple of inches of rain and discards it at a flush method, eliminating debris naturally at the start of every rain.

Storage Tanks

You may want a couple of storage tanks to store your water. It’s also your primary concern regarding maintaining your system sanitary as it’s going to be where water may stagnate.

Conveyance System

The conveyance system is the thing that joins the catchment surface into own storage tanks. This system may be as straightforward as a gutter top from the roof into a tank, but in case you’ve got several tanks, multiple catchments surface underground storage, then the machine can find a bit more complicated.

You’ll require the display to keep things off your roof and from your saved water. Likewise, they could permeate your water storage and lead to illness.

How To Collect Rainwater For Drinking

Conclusion

Having gone through all the essentials of collecting rainwater for drinking, endeavor to apply the necessary caution, especially when buying rainwater harvesting materials.

The how to collect rainwater for drinking article is an eye-opener to easy and straightforward ways of collecting rainwater.

A lot of people have been engaged in this system for a long time. All you have to do is ensure that yourmethod of rainwater collection is the safest. With a little bit of ingenuity, diligence, and some attention to details, you can have a lifetime supply of water from rainwater.

We will love to hear from you regarding your experience.


Tags


You may also like

How Often to Water Poinsettia

How Often To Water Poinsettia? Care Guide For Live Christmas Plant

The poinsettia is a popular holiday plant. Its bright red leaves and

​Read More
How to bath a dog without water waterev

How To Bath A Dog Without Water: 13 Steps (With Pictures)

A dog is a member of our family, and they deserve to

​Read More
How often do you water outdoor potted plants

How Often Do You Water Outdoor Potted Plants? – 12 Tips For Healthy Flowers

When determining if your plants need water, the finger-dip test remains the

​Read More
How often to water impatiens

How Often To Water Impatiens? New & Overwatered Impatiens Care & Tips

Impatiens (also known as busy Lizzy) are beautiful houseplants that are easy

​Read More
How often to water fruit trees

How Often To Water Fruit Trees? Young Fruit Trees Need Plenty Of Water

A fruit tree is a perennial plant that grows from a seed.

​Read More
How often to water an Orange Tree

How Often To Water An Orange Tree: Tips, Tricks, And Requirements

Orange trees are some of the oldest living things on earth. They

​Read More
Leave a Repl​​​​​y
{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

Check the articles below

December 9, 2023

The poinsettia is a popular holiday plant. Its

December 6, 2023

A dog is a member of our family,

December 1, 2023

When determining if your plants need water, the